Manuals / Q-Logic / Computer Equipment / Switch

Q-Logic 59022-11 A 4-13, SANBOX2-16 Set Setup Command, Set setup, Radius Services Snmp System

Models: 59022-11 A 4-13 SANBOX2-16

1 322

Download 322 pages 943 b

Page 251

0	A – Command Line Interface
	A – Command Line Interface
	Set Setup Command

Set Setup Command

Manages configuration settings for Remote Authentication Dial-In User Service (RADIUS) servers, switch services, SNMP, and system configurations.

Authority	Admin session
Syntax	set setup
	radius
	services
	snmp
	system
Keywords	radius
	Prompts you in a line-by-line fashion to configure RADIUS servers for user
	account and device authentication. Table A-23describes the RADIUS server
	configuration fields.
		Table A-23. RADIUS Service Settings

	Entry		Description

	DeviceAuthOrder		Authenticator priority for devices:
			Local: Authenticate devices using only the local security
			database. This is the default.
			Radius: Authenticate devices using only the security
			database on the RADIUS server.
			RadiusLocal: Authenticate devices using the RADIUS
			server security database first. If the RADIUS server is
			unavailable, then use the local switch security database.
	UserAuthOrder		Authenticator priority for user accounts:
			Local: Authenticate users using only the local security
			database. This is the default.
			Radius: Authenticate users using only the security
			database on the RADIUS server.
			RadiusLocal: Authenticate users using the RADIUS
			server security database first. If the RADIUS server is
			unavailable, then use the local switch security database.
	TotalServers		Number of RADIUS servers to configure during this session.
			Setting TotalServers to 0 disables all RADIUS
			authentication. The default is 0.
	ServerIPAddress		IP address of the RADIUS server. The default is 10.0.0.1.
	ServerUDPPort		User Datagram Protocol (UDP) port number on the RADIUS
			server. The default is 1812.
	DeviceAuthServer		Enable (True) or disable (False) this server for device
			authentication. The default is False.

59022-11 A

A-77

Image 251

Q-Logic 59022-11 A 4-13, SANBOX2-16 manual Set Setup Command, Set setup, Radius Services Snmp System, Configuration fields

Contents

SANbox2-8c/16 Switch Management User’s Guide Document Revision History SANbox2-8c/16 Switch Management User’s GuideTable of Contents Section Managing Fabrics SANbox2-8c/16 Switch Management Working with Device Information and Nicknames Zoning a Fabric Changing a User Account Password Section Managing SwitchesSection Managing Ports Changing the Default Performance View File Encryption Key109 Appendix a Command Line Interface103 106Glossary Index Figures Tables 131 Port Threshold Alarm Configuration DefaultsRelated Materials Intended AudienceJdom License Contact Information Technical SupportAvailability TrainingIntroduction Technical Support 59022-11 a Using SANsurfer Switch Manager Workstation Requirements Installing the Management ApplicationWorkstation Requirements For a Linux platform SANsurfer Switch ManagerChange directory to the location of the install program For a Windows platformOpen the CD and move to the following folder SMS Installation for WindowsSANsurfer Management Suite For a Mac OS X platformChglax.bat SMS Installation for Linux SMS Installation for Solaris Locate and execute the file sbmoversms.sh Install the new SANsurfer Switch Manager packageChange directories to the package location Starting SANsurfer Switch Manager Initial Startup Dialog ‰ For Linux or Solaris enter the SANsurfer commandSANsurfer Switch Manager Window Exiting SANsurfer Management Suite Save Default Fabric View File DialogLoad Default Fabric File Dialog Uninstalling SANsurfer Switch ManagerInstalldirectory/UninstallData/SANsurferUninstaller SMS UninstallChanging the Encryption Key for the Default Fabric View File Standalone UninstallSaving and Opening Fabric View Files Setting SANsurfer Switch Manager PreferencesPreferences Dialog SANsurfer Switch Manager Viewing Software Version and Copyright Information Using Online HelpFaceplate Display SANsurfer Switch Manager User InterfaceTopology Display Menu options in the topology display are shown in Figure Menu BarTopology Display Menu Menu options in the faceplate display are shown in Figure Faceplate Display MenuShortcut Keys Tool Bar Buttons Tool BarFabric Tree Fabric TreeData Window and Tabs Working Status IndicatorGraphic Window Switch and Link Status Using the Topology DisplayArranging Switches in the Display Working with Switches and LinksSelecting Switches and Links Topology Data Windows Opening the Faceplate Display and Topology Popup MenusPort Views and Status Using the Faceplate DisplaySelecting Ports Working with PortsOpening the Faceplate Popup Menu Faceplate Data Windows Page Radius Servers Managing FabricsAdd Server Adding a Radius ServerManaging Fabrics Remove Server Removing a Radius ServerEdit Radius Server Information Editing Radius Server InformationModify Authentication Order Radius Server Information Modifying Authentication Order Radius Server InformationFabric security consists of the following Securing a FabricConnection Security User Account Security Security Consistency ChecklistDevice Security Edit Security Dialog Edit Security DialogCreating a Security Set Create Security Group Dialog Create Security Group DialogCreating a Security Group Create a Security Group Member Dialog Create Security Group Member DialogCreating a Security Group Member Editing the Security Configuration on a Switch Viewing Properties of a Security Set, Group, or Member Using the Security Config DialogDeactivating a Security Set Archiving a Security Configuration to a FileActivating a Security Set Active Security Data Window Configured Security Data WindowFabric Services Enabling Snmp ConfigurationSaving a Version Snapshot Click the In-band Management Enable buttonEnabling In-band Management Tracking Fabric Firmware and Software VersionsExporting Version Snapshots to a File Viewing and Comparing Version SnapshotsAdding a Fabric Managing the Fabric DatabaseOpening a Fabric View File Removing a FabricRediscovering a Fabric Adding a New Switch to a FabricSaving a Fabric View File Replacing a Failed Switch Displaying Fabric Information Deleting Switches and LinksFabric Status Topology Display Switch and Status Icons11. Events Browser Displaying the Event BrowserIcon Severity Levels12. Filter Events Dialog Filtering the Event BrowserSaving the Event Browser to a File Sorting the Event BrowserDevices Data Window Entries Devices Data Window13. Active Zone Set Data Window Active Zone Set Data WindowDisplaying Detailed Device Information SANsurfer Switch Manager enables you to do the followingLink Data Window Working with Device Information and NicknamesCreating a Nickname Exporting Device Information to a FileManaging Device Port Nicknames Exporting Nicknames to a File Editing a NicknameDeleting a Nickname Zoning Concepts Importing a Nicknames FileZoning a Fabric Soft Zones ZonesZone Sets Access Control List Hard ZonesAliases Zoning Database Managing the zoning database consists of the following Using the Zoning WizardManaging the Zoning Database 15. Edit Zoning Dialog Editing the Zoning DatabaseEdit Zoning Dialog Tool Bar Buttons and Icons 16. Zoning Config Dialog Configuring the Zoning DatabaseSaving the Zoning Database to a File Default VisibilityInterop Auto Save Discard InactiveRemoving All Zoning Definitions Restoring the Default Zoning DatabaseRestoring the Zoning Database from a File Creating a Zone Set Managing Zone SetsCopying a Zone to a Zone Set Activating and Deactivating a Zone SetRemoving a Zone Set Removing a Zone from a Zone Set or from All Zone SetsManaging zones involves the following Managing ZonesCreating a Zone in a Zone Set Adding Zone Members Click the OK button to add the member and save the change Renaming a Zone or a Zone SetRemoving a Zone Member Removing a Zone from a Zone SetManaging Aliases Removing a Zone from All Zone SetsChanging Zone Types Adding a Member to an Alias Creating an AliasZone Merge Failure Removing an Alias from All ZonesMerging Fabrics and Zoning Zone Merge Failure Recovery Managing Switches Factory User Accounts Managing User AccountsCreating User Accounts User Account Administration Dialog Add AccountRemoving a User Account User Account Administration Dialog Remove AccountUser Account Administration Dialog- Change Password Changing a User Account PasswordModifying a User Account User Account Administration Dialog Modify AccountFaceplate Display Displaying Switch InformationSwitch Data Window Entries Switch Data WindowRatov Switch Data Window Entries Displaying Detailed Device Information on page 3-34for Port Statistics Data Window Faceplate Display Port Information Port Information Data WindowConfigured Zonesets Data Window Configured and Active Zonesets Data WindowPort Threshold Alarm Configuration Dialog Configuring Port Threshold AlarmsSample Window Paging a SwitchEvent CountResetting a Switch Setting the Date/Time and Enabling NTP ClientType Description Switch ResetsUsing the Configuration Wizard Configuring a Switch10. Switch Properties Dialog Switch PropertiesSwitch Administrative States Symbolic NameSwitch Administrative States Domain ID and Domain ID Lock Fabric Device Management Interface In-band Management Broadcast SupportInterop Mode for Zoning Advanced Switch PropertiesLegacy Port Address Format Timeout ValuesTimeout Values 12. System Services Dialog System Services DialogSecurity Consistency Checklist Dialog 13. Network Properties Dialog Network PropertiesIP Configuration Parameters IP ConfigurationNTP Client Remote Logging14. Snmp Properties Dialog Snmp PropertiesSnmp Configuration Parameters Snmp ConfigurationSnmp Trap Configuration Parameters Snmp Trap ConfigurationArchiving a Switch 15. Restore Dialogs Full and Selective Restoring a SwitchManaging Switches Factory Default Configuration Settings Restoring the Factory Default ConfigurationDownloading a Support File Installing Firmware 16. Hardware Status LEDs Displaying Hardware StatusManaging Switches Displaying Hardware Status 59022-11 a Displaying Port Information Managing PortsPort Types Monitoring Port StatusDisplaying Port Types Port Speeds Displaying Port Operational StatesDisplaying Port Speeds Port Operational StatesTransceiver Media View Displaying Transceiver Media StatusPort Statistics Data Window Entries LIP ALPD,ALPS Port Information Data Window Entries Port Information Data Window Entries Port Information Data Window Entries Port Properties Dialog Configuring PortsPort Administrative States Changing Port Administrative StatesChanging Port Speeds Stream Guard Changing Port TypesDevice Scan Changing Port Symbolic NameUsing the Extended Credits Wizard Designate Donor Ports Testing Ports Resetting a PortTesting Ports Fabric View Graphs Graphing Port PerformanceStarting SANsurfer Performance Viewer This section describes how to do the followingExiting SANsurfer Performance Viewer Save Default Performance View File DialogDisplayed Saving and Opening Performance View FilesSetting SANsurfer Performance Viewer Preferences Changing the Default Performance View File Encryption KeyDisplaying Graphs Setting the Polling FrequencyCustomizing Graphs Arranging Graphs in the DisplayManaging Ports Saving Graph Statistics to a File Setting Global Graph TypeRescaling a Selected Graph Printing GraphsLogging On to a Switch Command Line InterfaceUser Accounts Working with Switch ConfigurationsModifying a Configuration Backing up and Restoring Switch Configurations Ftp ipaddress Table A-1. Command-Line Completion CommandsAdmin Session Commands Table A-2. Commands Listed by Authority LevelKeywords Admin CommandAuthority SyntaxSyntax alias Alias CommandRename aliasold aliasnew Members aliasRemove alias memberlist CIM Command Table A-3. CIM Listener Configuration Parameters CIMListener CommandEnter Following is an example of the CIMListener Create commandTable A-4. CIM Subscription Configuration Parameters CIMSubscription CommandMust be Saved with the cim save command Edit configname Config CommandSyntax config Keywords activate confignameSave configname RestoreManager Archive function are not compatible with the Config Restore command# ftp symbolicname or ipaddress Support Create CommandCreate CertificateCommand Line Interface Create Command Following is an example of the Create Certificate command Keywords MMDDhhmmCCYY Date CommandSyntax date Syntax firmware install Firmware Install CommandAuthority Admin Syntax group Group CommandTable A-5. ISL Group Member Attributes Keywords add groupTable A-6. Port Group Member Attributes Create group type Copy groupsource groupdestinationTable A-8. Group Member Attributes Edit group memberSecuritysets group Members groupRemove group memberlist Rename groupold groupnewISL Following is an example of the Group Edit commandFollowing is an example of the Group Members command Following is an example of the Group List commandSyntax Hardreset CommandAuthority None Help CommandKeywords command Syntax help command keywordAuthority None Syntax history History CommandHotreset Hotreset CommandImage Command Are running the same version of firmware FTP. Enter one of the following on the command lineSwitch name associated with the IP address Enter the following account name and passwordWait for the unpack to complete Open an Admin session to acquire the necessary authorityLip portnumber Lip CommandFollowing is an example of the Lip command Reinitializes the specified loop portSyntax passwd accountname Keywords accountname Passwd CommandSyntax ping ipaddress Keywords ipaddress Ping CommandDisplays current system process information Ps CommandFollowing is an example of the Ps command Syntax ExamplesSyntax quit, exit, or logout Quit CommandCloses the Telnet session Config configname Reset CommandSystem ServicesSwitch SnmpValues Table A-9. Switch Configuration DefaultsArbff Table A-10. Port Configuration DefaultsTable A-12. Zoning Configuration Defaults Table A-11. Port Threshold Alarm Configuration DefaultsTable A-13. Snmp Configuration Defaults Table A-15. Services Configuration Defaults Table A-14. Radius Configuration DefaultsTable A-17. Security Configuration Defaults Table A-16. System Configuration DefaultsKeywords active Security CommandHistory Following is an example of the Security Active commandFollowing is an example of the Security Limits command Following is an example of the Security History commandFollowing is an example of the Security List command Securityset Command Rename securitysetold securitysetnew Delete securitysetGroups securityset Remove securityset groupSyntax set Set CommandPort option Setup optionSwitch state Pagebreak statePort portnumber Set Config CommandSet config Table A-18. Set Config Port ParametersTable A-18. Set Config Port Parameters Security Table A-20. Set Config Switch Parameters Table A-19. Security Configuration ParametersRatov Threshold Table A-21. Set Config Threshold ParametersTable A-22. Set Config Zoning Parameters Arbff Following is an example of the Set Config Switch command Following is an example of the Set Config Security commandFollowing is an example of the Set Config Threshold command Following is an example of the Set Config Zoning command Component filterlist Set Log CommandSet log ArchiveDisplay filter SnmpStop Level filterPort portlist StartAlarms are always logged and always displayed on the screen Bypass alpa Set Port CommandEnable Keywords portnumberState state Configuration fields Set Setup CommandSet setup Radius Services Snmp SystemTable A-23. Radius Service Settings Table A-24. Switch Services Settings Table A-24. Switch Services Settings Table A-25. Snmp Configuration Settings Table A-25. Snmp Configuration Settings Table A-26. System Configuration SettingsTable A-26. System Configuration Settings Following is an example of the Set Setup Services command Following is an example of the Set Setup Snmp command SANbox2 admin # set setup system Following is an example of the Set Setup System commandKeywords about Show CommandFdmi portwwn Alarm optionCimlistener listenername Cimsubscription subscriptionnamePagebreak Log optionLsdb Ns optionTbuf Table A-27. Show Port ParametersLIPF8ALPS Steering domainid Post log„ Zoning History, Limits, List Table A-28. Switch Operational ParametersWhoami Zoneset Active, ListUsers Displays the current time zone settingTopology Displays all connected devicesFollowing is an example of the Show Fabric command Following is an example of the Show Domains commandFollowing is an example of the Show Fdmi WWN command Following is an example of the Show Fdmi commandFollowing is an example of the Show NS portID command Following is an example of the Show NS local domain commandFollowing is an example of the Show NS domainID command Collisions0 txqueuelen100 Following is an example of the Show Interface commandPL-XPL-VC-SG3-22 Following is an example of the Show Port commandFollowing is an example of the Show Topology command Following is an example of the Show Switch command59022-11 a 101 Following is an example of the Show Version command Show config Show Config CommandFollowing is an example of the Show Config Switch command Following is an example of the Show Config Zoning command Following is an example of the Show Config Threshold commandKeywords numberofevents Show Log CommandNone Show logPort SettingsLevel OptionsFollowing is an example of the Show Log command Following is an example of the Show Log Level commandFollowing is an example of the Show Log Options command Show Perf Command Following is an example of the Show Perf Byte command Mfg Show Setup CommandShow setup Following is an example of the Show Setup Radius command Following is an example of the Show Setup Services commandFollowing is an example of the Show Setup Snmp command Following is an example of the Show Setup System command Shutdown Shutdown CommandPower from the switch Status Test CommandTest Port portnumber testtypeAdmin start Test port x online Authority None Syntax uptime Uptime CommandExamples The following is an example of the Uptime command Add User CommandUser AccountsFollowing is an example of the User Edit command Following is an example of the User Add commandFollowing is an example of the User List command Following is an example of the User Delete commandWhoami Whoami CommandFollowing is an example of the Whoami command Syntax zone Zone CommandType zone zonetype Members zoneRemove zone memberlist Rename zoneold zonenewFollowing is an example of the Zone Members command Following is an example of the Zone Zonesets command Syntax zoneset Zoneset CommandZones zoneset Remove zoneset zonelistRename zonesetold zonesetnew Opens a Zoning Edit session Zoning CommandLimit Description Table A-29. Zoning Database LimitsE1JBOD1 E2JBOD2 Following is an example of the Zoning Limits commandFollowing is an example of the Zoning List command Command Line Interface Zoning Command 134 59022-11 a BootP Access Control List ZoneAdministrative State AlarmFabric Management Switch Class 3 ServiceConfigured Zone Sets Default VisibilityMaintenance Mode Input Power LEDInter-Switch Link Maintenance ButtonSmall Form-Factor Pluggable Power On Self Test PostPrincipal Switch SANsurfer Switch ManagerIndex Index-2 59022-11 a 59022-11 a Index-3 Index-4 59022-11 a 59022-11 a Index-5 Index-6 59022-11 a 59022-11 a Index-7 Index-8 59022-11 a 59022-11 a Index-9 Index-10 59022-11 a