
| 0 | 
 | 
 | 4 – Managing Switches | 
| 
 | 
 | 
 | |
| 
 | 
 | 
 | Displaying Switch Information | 
| 
 | 
 | 
 | 
 | 
| 
 | 
 | 
 | 
 | 
| 
 | Table  | ||
| 
 | 
 | 
 | |
| 
 | Entry | Description | |
| 
 | 
 | 
 | |
| 
 | Warning Temperature | ||
| 
 | 
 | above which a warning condition alarm is generated. | |
| 
 | Failure Temperature | ||
| 
 | 
 | above which a failure condition alarm is generated. | |
| 
 | NTP Client Enabled | Enabled or disabled. Allows for switches to synchronize | |
| 
 | 
 | their time a centralized server. | |
| 
 | NTP Server Address | The IP address of the centralized NTP server. Ethernet | |
| 
 | 
 | connection to NTP server is required. | |
| 
 | FDMI Enable | Fabric Device Management Interface status. If enabled, | |
| 
 | 
 | device information can be obtained, managed, and saved | |
| 
 | 
 | through the fabric using Name Service Management | |
| 
 | 
 | Server functions. SANsurfer Switch Manager will report | |
| 
 | 
 | any and all FDMI information reported by the entry switch, | |
| 
 | 
 | if FDMI is enabled on the entry switch. Refer to | |
| 
 | 
 | ”Displaying Detailed Device Information” on page  | |
| 
 | 
 | information about displaying FDMI information. | |
| 
 | FDMI HBA Entry Limit | Maximum number of HBAs that can be registered with a | |
| 
 | 
 | switch. | |
| 
 | Number of Donor Groups | Total number of donor port groups. A donor group is a set | |
| 
 | 
 | of ports on a switch that can donate buffer credits to each | |
| 
 | 
 | other. | |
| 
 | Embedded GUI | SANsurfer Switch Manager web applet status. Enables or | |
| 
 | 
 | disables the web applet on the switch. | |
| 
 | Inactivity Timeout | Number of minutes the switch waits before terminating an | |
| 
 | 
 | idle command line interface session. Zero (0) disables the | |
| 
 | 
 | time out threshold. | |
| 
 | GUI Mgmt Enabled | Switch management application status. If disabled, the | |
| 
 | 
 | switch cannot be managed using the application. | |
| 
 | Telnet Enabled | Telnet client status | |
| 
 | SSH Enabled | Secure Shell status. If enabled, an encrypted data path is | |
| 
 | 
 | provided for command line interface sessions. | |
| 
 | SSL Enabled | Secure Sockets Layer status. If enabled, encryption for | |
| 
 | 
 | switch management application and CIM sessions is | |
| 
 | 
 | provided. | |
| 
 | 
 | 
 | 
 | 
