Samsung Msys SF-830, Msys 830, Msys 835P manual Redial Interval

Option	Description
	When receiving a document as long as or longer than the
	paper installed in your product, the product can reduce
	the size of the document to fit the size of paper loaded in
	the product. Select ON if you want to automatically reduce
	an incoming page. You can set the Horizontal Reduction.
RX REDUCTION	With Horizontal Reduction enabled, the product reduces
	an incoming document along the vertical axis only.
	With this feature set to OFF, the product cannot reduce
	the document to fit onto one page, the document is
	divided and printed in actual size on two or more pages.
	When receiving a document as long as or longer than the
	paper installed in your product, you can set the product to
	discard any excess at the bottom of the page. If the
	received page is outside the margin you set, it will print on
	two sheets of paper at the actual size.
DISCARD SIZE	If the document is within the margin, and the RX
	Reduction feature is turned ON, it will be reduced to fit
	into the appropriate size paper (Discard does occur). If
	the Auto Reduction feature is turned OFF or fails, the data
	within the margin will be discarded. Settings range from 0
	to 30 mm.
	Your product can automatically redial a remote fax
REDIAL INTERVAL	machine if it was busy. Intervals from 1 to 15 minutes can
	be entered.
REDIALS	Specifies the number of redial attempts (0 to 13). If you
	enter 0, the product will not redial.
ANSWER ON RINGS	Specifies the number of times the product rings (1 to 7)
	before answering an incoming call.
	When enabled, all fax transmission documents are
	automatically scanned into memory. It will not be
SEND FROM MEMORY	necessary to wait until documents in the Automatic
	Document Feeder are sent before you can send or store
	other fax jobs.
	When enabled, the product automatically prints the page
LOCAL ID	number and date and time of reception at the bottom of
	each page of a received document.
CLOCK MODE	You can configure the product to display time using either
	a 12-hour or 24-hour format.

8.6 ADDITIONAL FEATURES