Contrast
1Press Contrast to compensate for the brightness or darkness of your faxed document.
2By pressing Contrast repeatedly or using the navigation buttons, you can choose from 5 contrast levels.
Set to darker mode when the document contains faint |
|
pencil markings or light print. | 4 |
Set to lighter mode for dark print. |
Image
Image setting is used to select the text type for the current copy or fax job. To select the image type, take the following steps:
1Press Image. You can see the current setting on the bottom line of the display.
2Press Image or the navigation buttons repeatedly until the desired mode appears. You can choose from:
TEXT: Use for documents containing mostly text.
MIXED: Use for documents with mixed text and graphics.
PHOTO: Use when the originals are photographs.
Sending a Fax Automatically
1Feed the document(s) face down into the ADF.
2Adjust the document settings if necessary. For details, see “Adjusting Document Settings” on page 4.4.
3Enter the remote fax phone number using the number keypad.
To enter the number you can also press a
SENDING A FAX 4.5
