Using the Bypass Tray
The Bypass tray is located at the right side of your product. It can be closed when you are not using it, making the product more compact.
Use the bypass tray to print transparencies, labels, envelopes or postcards in addition to making quick runs of paper types or sizes that are not currently loaded in the tray.
Acceptable print media are plain paper with sizes ranging from 3x5, to Legal 8.5 x 14 inch, the largest size acceptable, and weighing between 16lb and 43lb.
The following table summarizes the print media allowed as well as their stacking height limit.
Paper Type | Stacking Height Limit |
|
|
Plain Paper | 100 sheets or 9mm (max)a |
|
|
Envelope | 10 envelopes or 9mm (max)a |
|
|
Transparency | 30 sheets or 9mm (max)a |
|
|
Label | 10 sheets or 9mm (max)a |
|
|
Cardstock | 10 sheets or 9mm (max)a |
|
|
a.The height is measured with the stack of sheets laid, without being touched by hands, on a flat surface.
Notes:
•Always load only the print media specified in Specifications to avoid paper jams and print quality problems.
•Do not hit the bypass tray or rest your hands on it; otherwise the tray may be damaged or detached from the product.
•Remove any curl on postcards, envelopes, and labels before loading them into the
