Samsung Msys SF-830, Msys 830, Msys 835P manual Setting Date and Time, Inserting a Pause

Inserting a Pause

With some telephone systems, you must dial an access code (9 for example) and listen for a second dial tone. In such cases, you must insert a pause in the telephone number. You can insert

a pause while you are setting up one-touch dial, or speed dial 2 number.

To insert a pause, press Redial/Pause at the appropriate place while entering the telephone number. A “–” will appear on the LCD display at the corresponding location.

Setting Date and Time

The current time and date are shown on the LCD display when the product is on and ready for fax (Standby mode). The time and date are printed on all faxes you send.

Note: If power to the product is cut off for over 30 minutes, when power is restored, the product prompts you to reset time and date.

1Press Menu and then or repeatedly until “DATE & TIME” appears on the display, then press Enter.

2Enter the correct time and date using the number keypad.

Day	= 01 ~ 31
Month	= 01 ~ 12
Year	= requires the four digits
Hour	= 00 ~ 23(24-hour mode)
	01	~ 12(12-hour mode)
Minute	= 00	~ 59

You can also use or to move the cursor under the digit you want to correct, and enter a new number.

3To select AM or PM for 12-hour format, press or .

You can change the clock mode to 24-hour format (e.g. 01:00 PM as 13:00). For details, see page 8.6.

GETTING STARTED 2.5