Receiving Automatically in ANS/ FAX Mode
For this mode, you must attach an answering machine to the EXT jack on the back of your product.
1Press Menu and then 
or 
repeatedly until “SYSTEM SETUP” appears on the display, then press Enter.
The display shows “RECEIVE MODE” on the top line and the current setting on the lower line.
2Press 
or 
until you see “ANS/FAX” on the lower line, then press Enter to save the selection.
3When you receive a call, the answering machine will answer.
If the caller leaves a message, the answering machine stores the message as it would normally. If your product hears a fax tone on the line, it automatically starts to receive fax.
NOTES:
•If you have set your product to ANS/FAX mode and your answering machine is switched off, or no answering machine is connected to your product, your product will automatically go into FAX mode after a predefined number of rings.
•If your answering machine has a
•If you are in TEL mode (manual reception) when the answering machine is connected to your product, you must switch off the answering machine, or the outgoing message from the answering machine will interrupt your phone conversation.
5.4 RECEIVING A FAX
