•Store unused media at temperatures between 59oF and 86oF (15oC to 30oC). The relative humidity should be between 10% and 70%.
•Do not load more than 10 sheets of special media into the Bypass Tray at a time.
•Verify that the labels’ adhesive material can tolerate fusing temperature of 392oF (200oC) for 0.1 second.
•Make sure that there is no exposed adhesive material between the labels. Exposed areas can cause labels to peel off during printing, which can cause paper jams. Exposed adhesive can also cause damage to product components.
•Do not feed a sheet of labels through the product more than once. The adhesive backing is designed for one pass through the product.
•Do not use labels that are separating from the backing sheet or are wrinkled, bubbled, or otherwise damaged.
Loading Paper in Tray
The Tray 1 can hold a maximum of 550 sheets of 20lb plain paper. You can use
If you purchase an optional tray and attach it below the standard Tray 1, you can also load paper in the optional Tray 2.
To load paper, pull open the Tray 1 or the tray 2 and load paper with the print side facing up.
3.4 COPYING
