To load print media in the Bypass tray:
1Lower the Bypass tray, located on the right side of the product. Unfold the paper support extension as shown.
Paper support
Bypass tray
3
2Prepare a stack of paper or envelope for loading by flexing or fanning them back and forth. Straighten the edges on a level surface.
For transparencies; hold the transparencies by the edges and avoid touching the print side. Oils from your fingers that are deposited on the transparency can cause print quality problems. If you are using the transparencies with paper backing, insert a sheet of plaing paper on the tray before loading transparencies. Doing so prevents paper jams while feeding.
3Load the print material with the print side facing down and against the right edge of the tray.
