Confirming Transmission
When the last page of your document has been sent successfully, the product beeps and returns to Standby mode.
If something went wrong during your fax transmission, an error |
|
message appears on the LCD display. For a listing of error |
|
messages and their meanings, see page 10.13. If you receive an | 4 |
error message, press Stop/Clear to clear the message and try | |
to send the document again. |
You can set your product to print out a confirmation report automatically each time sending is completed. For details, see “Message Confirmation” on page 8.2.
Using Toll Save Transmission
If you have set a specific toll save time, you can quickly set your document(s) to be sent at the preset time using the SAVE Toll button on the front panel. Using this feature, you can take advantage of lower long distance rates at night, for example.
The toll save end time is fixed to midnight (12:00 PM). Therefore the toll save time slot is determined by the start time you specify. If you have set 9:00 PM for the start time, the document you set to use the toll save feature will be transmitted during the toll save time slot
To set the Toll save start time:
1Press and hold the SAVE Toll button on the control panel. The LCD display prompts you to enter the time.
2Enter the specific start time using the number keypad, then press Enter to save the setting.
To send a fax using the Toll save feature:
1Press SAVE Toll on the control panel briefly. “ON” or “OFF” appears on the bottom line.
2To activate the toll save feature, select “ON” by using the SAVE Toll button or the navigation buttons.
SENDING A FAX 4.7
