Condition
Probable cause
Suggested solutions
|
| Change the USB mode to “SLOW.” | ||||
|
| To do so, take the following steps: | ||||
|
| 1. Press Menu and then | or | |||
|
| repeatedly until “SYSTEM | ||||
|
| SETUP” appears on the display, | ||||
|
| then press Enter. |
| |||
When printing | When the USB mode is | 2. Use | or | until “USB MODE” | ||
using the USB | set to “FAST” some PC | |||||
appears on the top line of the | ||||||
connection, an | users may experience | |||||
display. The current setting | ||||||
error occurs | poor USB | |||||
appears on the bottom line. | ||||||
repeatedly. | communication. | |||||
|
|
|
| |||
|
| 3. Press | or | to select “SLOW.” | ||
|
| 4. Press Enter to save the |
| |||
|
| selection. |
|
| ||
|
| 5. Press Stop/Clear to return to | ||||
|
| Standby mode. |
| |||
|
|
| ||||
|
| If your computer is equipped with | ||||
| The computer parallel | an ECP parallel port, enable this | ||||
| port may not be set for | mode of operation. Refer to the | ||||
| high speed | Enabling High Speed Printer |
| |||
| communications. | Communications section and your | ||||
|
| PC’s user guide. |
| |||
|
|
| ||||
|
| Point to the Start and then click | ||||
|
| Settings then Printers. Click | ||||
Printing is too | If using Windows 9x/ | your product icon with the right | ||||
slow. | Me, the spool setting | mouse button. Click Properties | ||||
| may be set incorrectly. | and then spool settings on the | ||||
|
| Details tab. Select the desired | ||||
|
| setting from the available choices. | ||||
|
|
|
|
|
| |
| Computer may not have | Install more RAM in your computer. | ||||
| enough memory (RAM). | |||||
|
|
|
|
| ||
|
|
| ||||
| The print job is large. | Reduce resolution from 600 dpi to | ||||
| 300 dpi. |
|
|
| ||
|
|
|
|
| ||
|
|
|
|
|
| |
10
