Changing the Display Language
1Press Menu and then 
or 
repeatedly until “SYSTEM SETUP” appears on the display, then press Enter.
2Press 
or 
until you see “SELECT LANGUAGE” on the display. The current setting is displayed on the lower line.
3Press 
or 
to display the desired language.
4Press Enter to save the selection.
5To return to Standby mode, press Stop/Clear.
Setting System ID
In some countries you are required by law to indicate your fax number on any fax you send. The System ID, containing your telephone number and name (or company name), will be printed at the top of each page sent from your product.
1Press Menu and then 
or 
repeatedly until “SYSTEM ID” appears on the display, then press Enter. The LCD display asks you to enter the fax number.
If there is a number already set, the number appears.
Enter your fax telephone number using the number keypad. You can include the + symbol in the phone number by pressing the 
button and insert a space by pressing the # button.
NOTE: If you make a mistake while entering numbers, press 
at the end of the entries to delete the last digit or press Search/ Delete to delete all digits you entered.
When the cursor is in the first digit or in the middle of the number,
you can use 
or 
to move the cursor under the wrong digit to correct.
2.2 GETTING STARTED
