Managing Department
Turning the Department Mode On or Off
You can select to enable or disable the department control mode. When the department control mode is executed, only one who enters correct Department code can use the machine.
1Press Menu and then 
or 
repeatedly until “DEPARTMENT CODE” appears on the display, then press Enter.
2Enter the master code using the number keypad, then press Enter.
If you enter wrong code, “CODE MISMATCH! TRY AGAIN” appears in the display. Try again with the correct code.
3Press Enter when “MANAGEMENT“ appears on the lower line of the display.
The LCD display shows:
4To enable the department control mode, press 1. To disable the department control mode, press 2.
5Press Enter.
To return to Standby mode, press Stop/Clear.
When the department control mode is enabled, the Standby display shows:
Unless you enter the correct department code, you cannot use any feature except receiving.
