2626
ENGLISH ESPAÑOL
The Camcorder: Preparation

Adjusting the Hand Strap

It is very important to ensure that the Hand Strap has been
correctly adjusted before you begin your recording.
The Hand Strap enables you to:
- Hold the camcorder in a stable, comfortable position.
- Press the Zoom Lever, START/STOP, and PHOTO buttons
without having to change the position of your hand.
Hand Strap
1. Pull open the Hand Strap to
release the Hand Strap.
2. Adjust its length and stick it back
onto the Hand Strap.
Shoulder Strap
The Shoulder Strap enables you to carry
your camcorder around in complete
safety.
1. Insert the end of Shoulder Strap
into the Shoulder Strap Hook on
the Camcorder.
2. Insert the other end of the strap
into the ring attached to the Hand
Strap.
3. Thread each end into the buckle,
adjust the length of the strap and
then pull it tight in the buckle.
Be sure to secure the shoulder strap. Improper threading of the
shoulder strap may result in serious damage if the Camcorder
drops and hits a hard surface.
Note
Videocámara: Preparación

Ajuste de la empuñadura

IEs muy importante asegurarse de que la empuñadura esté
correctamente ajustada antes de empezar la grabación.
La empuñadura permite:
- Mantener la videocámara en una posición estable y
cómoda.
- Pulse la palanca del Zoom, START/STOP y PHOTO sin
tener que cambiar la posición de la mano.
Empuñadura
1. Tire de la empuñadura para
soltarla.
2. Ajuste la longitud de la correa y
ponga la correa sobrante
nuevamente dentro de la
empuñadura.
Correa para el hombro
La correa para el hombro permite
llevar la videocámara de manera
segura.
1. Introduzca un extremo de la
empuñadura en el enganche de la
empuñadura de la videocámara.
2. Inserte el otro extremo de la
correa en la anilla derecha de la
empuñadura.
3. Pase cada uno de los extremos
de la correa por la hebilla y ajuste
la longitud que desee.Finalmente
tire de los extremos para que
queden bien sujetos a las hebillas.
Asegúrese de fijar la correa para el hombro. Una colocación
incorrecta de la correa para el hombro puede producir serios
daños si la videocámara cae y se golpea en una superficie dura.
Nota
1
1
2
2
3
00779D SCD6050 UK+ESP (08-59) 7/8/04 9:17 AM Page 26