Basic Operation Procedure
4 Chaper Tips Operation
For example, by releasing the CUT button, the data and audio signals are changed as follows.
1 When you press the CUT button, the audio signal status is held with the ON trigger and LEDs and ON/OFF status are inverted.
2 As long as you hold down the CUT button, the audio signal status in step 1 is held and the displays change according to the automation operation.
3 When you release the CUT button, the audio signal status is adjusted to the display status with the OFF trigger.
The audio signal status in steps 1 to 3 is stored as automation data.
ON/OFF of the CUT button:
Press Release
Time
Cut data previsouly stored.
Cut data currently stored.
ON OFF trigger trigger
When shifting the stored Cut ON/OFF timing to an earlier time:
Time
When shifting the stored Cut ON/
OFF timing to a later time:
Press the button before the change and release the button after timing.
Time
When cancelling the stored Cut |
|
ON/OFF: |
|
Press the button before the change, then |
|
release the button after the change has |
|
been completed. | Time |
102 Chapter 4 Operation Tips