4SOLO MODE section

Changes the function of the channel SOLO buttons. SOLO button: When this button is lit, the SOLO buttons on the channel strip panel function as ‘destructive solo’ buttons and cause all other channels to cut.

For detailed information on how to set SOLO disabled, see “SOLO buttons” on the MONITOR window on page 61.

Note

The solo mode affects both monitoring and the mix output. The solo mode can be used for stereo pan and surround sound MTR bus monitoring.

AFL (after-fader listening) button: When this button is lit, the SOLO buttons on the channel strip panel function as the AFL buttons. The AFL signal is sent to the monitor, regalrdless the settings in the FADERS section.

PFL (pre-fader listening) button: When this button is lit, the SOLO buttons on the channel strip panel function as the PFL buttons. The PFL signal is sent to the monitor, regardless the settings in the FADERS section.

CANCEL button: Provides an automatic method of cancelling all SOLO’d channels (set in SOLO mode).

FADER

 

CUT

PGM

PAN

 

AFL

SOLO SW

PFL

AFL/PFL

SOLO MODE

CUT

PAN

SOLO MTR

SOLO

LOGIC

5HEADPHONES control

Adjusts the volume of the headphones.

2 Chapter

and Locations

of Functions

and Parts

Controls

Chapter 2 Locations and Functions of Parts and Controls

23