For System Setup

Changing the Keyboard Type

The DMX-R100 is factory-preset for use with a Japanese type keyboard.

Select the desired keyboard type as described below.

1 Turn on the power of the DMX-R100.

“Loading Now........

” appears.

2 While the numbers of dots on the screen is increasing, press [K] on the keyboard currently connected.

The following dialogue appears;

“Do you want to change the keyboard type? f : French keyboard (fr_FR_102.kbd)

g : German keyboard

(de_DE_102.kbd)

j : Japanese keyboard

(ja_JP_106.kbd)

u : US keyboard

(en_US_101.kbd)

other : Don’t change the keyboard type.”

3 Touch the character of the desired keyboard type; “f”, “g”, or “u”. The keyboard type indication on the bottom left of the window changes to the one selected.

Updating the DMX-R100 System

When you turn on the power of the DMX-R100, the starting-up window opens.

After the starting-up window closed once, the bar indication [–] starts to blink on the left top of the LED window.

While the bar indication [–] is blinking, if you press the ESC key on the external key board, the following dialogue appears:

“Will you update this system? (y/n)”

If the above dialogue appears on the window, be sure to select “N”.

The system starts as usual.

WARNING

If you press “y” on the key board, without having the floppy disks for updating system, the DMX-R100 system files may be damaged.

If you need update the system, contact your nearest Sony dealer.

ipsT Operation 4 Chapter

Chapter 4 Operation Tips

87