Operating the Touch Panel
Changing the channel
“CH XX” which is displayed next to the window name indicates the number of the channel.
To change the channel, press the ACCESS button on the corresponding channel strip.
Example: To change the channels to be displayed from
1 Press the 25 to 48 button on the Assignment panel to switch the faders to channels 25 to 48.
2 Press the ACCESS button corresponding to the
“INPUT/PAN/ASSIGN: CH 48” appears on the window.
You can also change the channel by using the +/- CHANNEL button on the Parameter Setting panel.
Setting the function ON/OFF (or IN/OUT) on the window
The IN button and NOTCH button allow you to switch the appropriate function on or off on the EQUALIZER/FILTER window and INPUT/PAN/ ASSIGN window.
When you touch one of these buttons, the color of the button turns green and this means the function of these buttons is IN (or ON). When you touch one of these buttons again, the color of the buttons turns pale and this means that the function of those buttons is OUT (or OFF).
Example: IN button
Blue or green: IN status
Gray: OUT status
3 Chapter Menu
Selecting the item
Many functions can be directly switched by button icons on the display. The color of the button icons will change to show their status.
In this manual, such an operation is described using the phrase “Touch .. to select...”.
The color change is not described if it is not necessary.
Selecting the channel or source individually
On the AUDIO INPUT ROUTING window and AUDIO OUTPUT ROUTING window, when you want to select a single channel, the sub menus of two levels open. Touch the desired channel or source to select it.
Sub menus of two levels
Chapter 3 Menu 41