Sony DMX-R100 Memory Structure and Title

Memory Structure and Title

Structure of Snapshot and Automation Memory

4 Chaper Tips Operation

Floppy disk
Title config
		Saved into the floppy disk
Snapshot		Loaded from the floppy disk
	Cue
Automation
Buffer A or B				SAVE
			LOAD
	Title #10
	Title #1			Current title		Dynamic RAM
Title config				Title config		Title config
							RECALL
Snapshot				Snapshot	KEEP	Snapshot	STORE
						TC LINK
	Cue			Cue		Cue
							RECALL
Automation				Automation		Automation	WRITE
Buffer A or B				Buffer A or B		Buffer A or B

Built in flash memory

When turning on the power

Console panel/

DSP

The above figure shows the memory structure of the unit.

Automation data, snapshot data and cue data created on the unit are stored, updated and deleted on the dynamic RAM. Thus, when restarting the unit or turning off the power of the unit, this data is lost.

To save the data that are being operated on the unit, select KEEP from the TITLE menu which opens by touching the TITLE button on the top bar on the window (in this manual, this operation is also called KEEP’d). Data in the work area on the dynamic RAM is saved in the current title which is the backup file in the flash memory. Thus, the data is not lost when restarting or turning off the power of the unit. You can save the current title as the title with the title number and title name on the TITLE MANAGER window.

Also, you can initialize the title by using the CLEAR button of CURRENT TITLE on the TITLE MANAGER window. In this case, the timecode and the sampling frequency of the title being used are stored. However, the remaining data items (such as automation data, snapshot data and cue data) are cleared.

88 Chapter 4 Operation Tips