Menu Windows

MACHINE CONTROL Window

To open this window, touch the MACHINE CONTROL button on the bottom menu bar.

This window allows you to set up the mixer to control devices that use MIDI machine control (MMC), Sony 9-pin and timecode chase.

Note

There may be machines which cannot be controlled

using this unit. Only one machine can be controlled at any one time, but the mixer can be quickly reconfigured to control up to six different machines.

3 Chapter Menu

1MACHINE tab

2Machine name

3 Port select button

4TAPE TIME display window and CAPTURE button

5LOCATE TIME display window and SET button

6PREROLL TIME display

window and SET button

KEYBOARD button

7 ALL STOP button

8 OPEN LOOP button

9 LOCATE button

0 Transport control buttons

1MACHINE tab

Touch this tab to select the machine to be controlled. You can control the selected machine using the transport control keys on the unit or from the MACHINE CONTROL window.

2Machine name

Displays the name of the machine.

You can change the name of the machine selected by touching this part, and using the keyboard connected to the unit or the KEYBOARD window.

3Port select button

Selects the port assigned to the machine.

•MIDI 1 to 16

•REMOTE OUT 1 or 2

•TC GEN: Built-in timecode generator

•NC (no connection)

4TAPE TIME display window and CAPTURE button

Displays the tape time of the machine. Touch the CAPTURE button to copy the tape time value displayed on the TAPE TIME display window onto the LOCATE TIME display.

70 Chapter 3 Menu