Menu Windows
AUDIO FADER GROUPING Window
To open this window, touch the AUDIO button on the bottom menu bar, then select “FADER GROUPING.” This window allows you to set the fader group and cut
group for channels 1 to 48, the MTR busses, the AUX send busses and the AUX return busses.
1Group selection area
2 Mode button
3 ON/OFF button
4 Channel buttons
3 Chapter
Menu
1Group selection area
Touch the corresponding button to select the desired group.
2Mode button
Each time you touch this button, the button display changes to GANG, VCA, or CUT, in order. GANG: Keeps the relative level among faders when touching faders on the unit.
VCA: When moving the fader assigned as the master fader, the difference between the original level and the current level is added to the level of the slave fader as offset. Slave faders don’t move when the master fader is moved.
CUT: The cut switches of the channels belonging to the corresponding group operate together.
The cut group is set independently from the fader group.
Note
To select the mode of the group, remove all channels from the group before attempting to select the mode.
3ON/OFF button
Selects whether the corresponding group is active.
4Channel buttons
One channel can belong to one fader group and one cut group. Channels cannot belong to multiple fader groups or cut groups.
On the channel button, the upper number indicates the fader group number and the lower number indicates the cut group number.
52 Chapter 3 Menu