AENBL/DIS (enable/disable) button

This button enables (or disables) the PFL monitor logic to inject the signal into the control room or studio LS output. It is possible to configure the mixer so that studio LS can be used as a dedicated PFL output.

When ENBL is displayed, the PFL signal is inserted into the monitor signal.

When DIS is displayed, the PFL signal is not inserted into the monitor signal.

BALT/MOM (alternate/momentary) button This button works for both the studio and the control monitor signals.

Selects the operation of the SOLO button of each channel when PFL is set to SOLO mode.

When MOM (MOMENTARY) is displayed, the PFL signal is active only while you hold down a channel SOLO button.

When ALT is displayed, the SOLO buttons operate in a latching mode.

8AFL buttons

Select how to insert the AFL signal and SOLO signal into the monitor signal.

AENBL/DIS (enable/disable) button

When ENBL is displayed, the AFL signal is inserted into the monitor signal.

When DIS is displayed, the AFL signal is not inserted into the monitor signal.

BALT/MOM (alternate/momentary) button

This button works for studio monitor signals and select the operation of the SOLO button when the mixer is set to SOLO mode.

When MOM (MOMENTARY) is displayed, the AFL signal is inserted only while you hold down the SOLO button on the unit.

When ALT is displayed, the AFL signal is toggled off and on each time you press the SOLO button.

9SOLO buttons

Set the functions of SOLO.

AENBL/DIS button

BALT/MOM button

C SOLO ISOLATE button

AENBL/DIS (enable/disable) button

Selects whether the SOLO function is executed or not. When ENBL is displayed, the SOLO function is executed.

When DIS is displayed, the execution of the SOLO function is prohibited.

Note

In DMX-R100, the SOLO mode is the listening mode which cuts all other channels. So SOLO affects the monitor and other mixer outputs. The AFL and PFL are the non-destructive listening modes that do not affect the other mixer outputs.

This button works for both the studio and the control monitor signals, differentiating from AFL and PFL.

BALT/MOM (alternate/momentary) button

This button works for both studio and control monitor signals.

Selects the operation of the SOLO button of each channel when setting the SOLO mode to SOLO. When MOM is displayed, the SOLO signal is inserted only while you hold down the SOLO button on the unit.

When ALT is displayed, the SOLO signal is toggled off and on each time you press the SOLO button.

CSOLO ISOLATE button

SOLO ISOLATE allows you to protect mixer channels from being CUT when the SOLO button is pressed on another channel. The SOLO ISOLATE is often used on channels that process signals from external effects devices.

To set a channel to SOLO ISOLATE, touch the SOLO ISOLATE button on the display and then press the channel SOLO buttons for the desired channels. Switching the SOLO ISOLATE display but clears the isolated channels.

3 Chapter Menu

Chapter 3 Menu 61