Menu Windows

3 Chapter Menu

When !SLP (SLIP) is displayed, the input signal is not synchronized to the unit.

BOUT buttons

On these buttons, RDY or NA is displayed as the status of the output signal of the channel.

By touching this button, the details of the output signal of the channel are displayed on the INFORMATION section 4.

The content of the display is as follows:

•RDY (ready)

Indicates that this channel can be used as the output signal.

•NA (Not Available)

Indicates that this channel cannot be used.

2DA 88 button

This button is displayed only when the DMBK-R107 is inserted into the slot.

When you have interfaced a DA-88 manufactured by the TEAC corporation with a DMBK-R107 Interface Board, touch this button to set it to ON (lit in green).

When you use an another TDIF device, set this button to OFF.

If this button is not turned on (lit in green) with a DA- 88 inserted into the slot, it is necessary to replace the ROM in the DMBK-R107 slot. Contact your Sony dealer.

3BUILT-IN DIGITAL I/O section

Displays the status of the signal of the built-in digital input/output connectors.

AIN buttons

BOUT buttons

AIN buttons

On these buttons, OK, NA, or !xxx is displayed as the status of the input signal.

By touching this button, the details of the input signal of the channel are displayed on the INFORMATION section 4 .

The content of the display is as follows:

•OK

Indicates that the signal is inputted correctly.

•NA (Not Available)

Indicates that this channel cannot be used as the output signal.

•!xxx

Indicates that there is trouble in the input signal or attention is required.

In this case, touch this button to display the details on the INFORMATION section and check the status of the input signal.

When !UNLC (unlock) is displayed, the input’s PLL cannot be locked.

When !SLP (SLIP) is displayed, the input signal is not synchronized to the unit.

BOUT buttons

On these buttons, RDY or NA is displayed as the status of the output signal of the channel.

By touching this button, the details of the output signal of the channel are displayed on the INFORMATION section 4.

The content of the display is as follows:

•RDY (ready)

Indicates that this channel can be used as the output signal.

•NA (Not Available)

Indicates that this channel cannot be used as the output signal.

4INFORMATION section

Displays detailed information on the signal selected by SLOT 1 to SLOT 4, the IN button or OUT button on the BUILT-IN DIGITAL I/O section.

The following items are displayed as the detailed information of the signal:

•DIPLL

Displays the status of the lock of the PLL built in each input path.

LOCK: Displays that the PLL is correctly locked.

UNLOCK: Displays that the PLL is not locked. In this case, “----” is displayed on the remaining information items.

•DATA

Displays the status of synchronization between the signal and the unit.

NORMAL: Indicates that they are correctly synchronized.

82 Chapter 3 Menu