2SAVE button

Touch this button to store the current title into the selected title on the list. Select the media where the current title is to be saved by the STORAGE MEDIA buttons 7 before attempting to save.

Notes

•When executing “SAVE” on a floppy disk, the data previously saved on the disk is cleared.

•After executing “SAVE”, do not turn off the power while the cursor indication changes to an arrow showing that the data has been processed or while the LED on the floppy disk drive in on. If you turn off the unit during this process, the title being saved may be lost, as the unit requires time to write the data in the flash memory or on the floppy disk.

3DELETE button

Touch this button to delete the title selected on the title list.

4LOAD button

Touch this button to load the title selected on the title list on the unit.

Note

When a title with different Fs setting is loaded, the unit automatically restarts.

5KEYBOARD button

Touch this button to open the KEYBOARD window allowing you to enter the title name or memo.

6FREE SPACE display

Displays the amount of free space for the media selected by the STORAGE MEDIA button 7. When FLOPPY DISK is selected, if the title is saved on multiple floppy disks, the amount of free space for each disk is displayed.

7STORAGE MEDIA buttons

FLASH MEMORY button: Touch this button to display the titles stored in the built-in flash memory on the title list.

When the TITLE MANAGER window is opened, the built-in flash memory is automatically selected. FLOPPY DISK button: Touch this button to display the titles stored on the floppy disk.

A dialogue “There are no titles or this an unformatted disk. Check the media in the floppy disk drive.” appears, in the following cases:

•A floppy disk is not inserted in the drive.

•The inserted disk is unformatted.

Notes

•When the titles have been saved in the floppy disk, titles and their information are displayed. When no title is saved on the floppy disk, the title list section and INFORMATION section are blank.

•When data has been saved in 2 or more floppy disks due to the size of the title, #1 or #2 is attached to the title name displayed in the NAME box in the INFORMATION section.

•When loading a title of two-disk set, be sure to load the firs disk (#1 is displayed or blank in the NAME box in the INFORMATION section). When the second disk of a two-disk set should be inserted, the dialog to replace the disk appears.

8FDD OPERATION buttons

SCAN button: Touch this button so that a floppy disk is scanned and the titles stored on the disk are displayed. Be sure to touch this button when you change the floppy disk.

FORMAT button: Touch this button to format the floppy disk inserted in the floppy disk drive. All data stored on the disk is erased. Titles displayed on the title list disappear.

9CURRENT TITLE CLEAR button

Touch this button, and a confirmation dialog box appears. After confirming, the new title is created based on the current sampling frequency and timecode mode in the flash memory and is loaded on the unit as a current title.

The new title is named “UNTITLED”.

Notes

•If a new title is created, all snapshot and automation data current in the unit are cleared. It is recommended that you save the data using the SAVE button 2 before creating a new title.

•When a new title is created by the CURRENT TITLE CLEAR button, the initial cue is automatically created. Before using the unit in

automation mode, reset the initial cue data.

For detailed information on the cue operation, see page 96.

3 Chapter Menu

Chapter 3 Menu 73