AUDIO INPUT ROUTING Window
To open this window, touch the AUDIO button on the bottom menu bar, then select “INPUT ROUTING.” This window allows you to assign the desired input signal to the desired channel.
1Destination select buttons
2 V button
3Source select button
2 v button
4 DEFAULT button
TB IN button
Block list
3 Chapter Menu
1Destination select buttons
The large display area shows all of the available destinations for the input matrix. Once an input signal has been selected, routing is achieved by pressing the appropriate destination button.
The talkback microphone can also be routed.
By selecting the TB IN button, the input signal selected by the source select button is used as the talkback signal. For example, if you assign LINE IN CH24 to the TB IN button, the input of the LINE IN CH 24 can be used as the talkback signal.
2v/V buttons
Touch the V button to select the block over the currently selected block.
Touch the v button to select the block below the selected block.
3Source select button
Displays the selected source block.
Touch this button to open the block list in the B direction. Touch the desired block button to open the list of the sources included in the block.
The list of source blocks and the source list of each source block are as follows:
•Blocks for AD 1 to 8 to AD 17 to 24
Each block has the source lists for 8 inputs.
•Blocks for SLOT 1 to SLOT 4
Each block has the source lists for 8 channels.
•AUX RET block
This block has the source list for 8 channels.
•MISC block
Includes the lists of
Chapter 3 Menu 55