WRITE buttons on the channel strips: Whenever you press the WRITE button, all of the controls that can be dynamically automated in the channel are READY’ed (i.e. are in READY status).
Notes
•The READY SETUP is automatically switched off when the timecode is run at PLAY speed.
•When the READY SETUP button is set to ON, the faders, controls and buttons, do not control the sound.
5OPTION button
This button is effective when the READY SETUP button is light yellow. If you touch this button, the pull down menu opens and you can select the items to be READY’ed. When you select WRITE HOLD on the pull down menu, HOLD is displayed on the button.
•ALL EQ: Sets the faders/equalizers of all channels to
READY.
•ALL DYNA: Sets dynamics of all channels to
READY.
•ALL AUX KNOB: Sets the AUX SEND controls of all channels to READY.
•ALL AUX BUTTON: Sets the AUX SEND buttons of all channels to READY.
•ALL CUT: Sets the cut setting of all channels to
READY.
•ALL ASSIGN: Sets the ASSIGN buttons of all channels to READY.
•ALL PAN: Sets the pan setting of all channels to
READY.
•ALL FADER: Sets the faders of all channels to
READY.
•ALL CANCEL: Sets all READY to SAFE modes.
•WRITE HOLD: Whenever you select this item, WRITE HOLD mode is switched on and off. When WRITE HOLD is selected, HOLD is displayed on the OPTION button. In this mode, items subject to automation in WRITE mode will not automatically be set to READY status when the timecode stops.
6Automation status, sampling frequency, timecode, mode and error displays
AAutomation status display
BSampling frequency, timecode, mode, and error display
AAutomation status display Displays the automation status mode.
• READY: Execution of automation is always possible if the timecode advances at the PLAY speed.
• RUN: Storing/recalling of automation is possible.
• STBY: Automation data cannot be stored due to the presence of timecode before cue, before the punch in or after the punch out. However, you can recall automation.
• OFF: Automation is set to OFF mode. You can operate all of the buttons and controls manually, but cannot store/recall automation data.
BSampling frequency, timecode, mode, and error display
Displays the sampling frequency and any error indication. The timecode display is from the internal timecode reader.
• When an error occurs on the word PLL (or video PLL), the sampling frequency display turns red.
• When the timecode does not advance correctly, “TC ERR” is displayed.
• When the format of the entered timecode is different from the format setting of the unit, the timecode mode is display in red.
7RETURN button
Touch this button to return to the previous window (from which the current window is displayed).
3 Chapter Menu
Chapter 3 Menu 39