3 Chapter Menu

Menu Windows

The display of the block list buttons corresponding to SLOT 1 to SLOT 4 depends on the board inserted.

•When the DMBK-R101 is inserted: SLOTxADC1 to 8

•When the DMBK-R102 is inserted: SLOTxDAC1 to 8

•When the DMBK-R103 is inserted: SLOTxDIO1 to 8

•When the DMBK-R104 is inserted: SLOTxSRC1 to 8

•When the DMBK-R105 is inserted: SLOTxINSERT1 to 8

•When the DMBK-R106 is inserted: SLOTxADAT1 to 8

•When the DMBK-R107 is inserted: SLOTxTDIF1 to 8

4DEFAULT button

Touch this button to reset the setting of the input matrix to the default.

Assigning the input source

1 Touch the source select button. The block list opens.

2 Touch the desired source block on the block list. The list of the sources included in the block opens.

If you want to assign all 8 sources to 8 adjacent processing channels, go to step 4.

3 Touch the desired source on the source list.

4 Touch the desired destination select button to select the destination processing channel to which the source signal is to be routed.

The source signal selected in step 3 is automatically routed to the destination processing channel. When you want to assign a complete block, simply select the block as is in step 2, then touch the first destination processing channel. Example: When you select ANALOG IN 1 to 8 as a block, if you touch this button of CH-3, the source signals of ANALOG IN 1 to 8 are routed to CH-3 to CH-10 respectively.

Resetting the input matrix to the default setting

1 Touch the DEFAULT button. A dialog box appears.

2 Touch [OK] in the dialog box.

The setting of the input matrix is reset to the default setting.

For detailed information on the contents of the default setting, see page 90.

56 Chapter 3 Menu