To assign or remove the channel to or from the group, proceed as follows.
Setting the GANG fader group
1 Touch the desired group button.
Example: To set GP 1 to the GANG mode:
Touch the
GROUP 1 button.
2 Touch the mode button for the group selected in step 1 until GANG appears on the mode button.
Display GANG.
3 Touch the channel button(s) that you wish to assign to the GANG group.
Channel(s) already assigned to other GANG or VCA groups must be unassigned before being available for selection.
The group number appears on the channel button.
GP1 appears.
To remove the channel from the group, touch this button(s) on which the group number is displayed. The group number disappears and that channel is removed from the group.
Setting the VCA fader group
Perform the following operation after step 1 described in “Setting the GANG fader group”.
2 Touch the mode button corresponding to the group selected in step 1 until VCA appears on the mode button.
3 Touch the channel button that you wish to assign to the VCA group.
When there are channels that are not assigned to the group, the fader of the channel that you touched first becomes the master fader. GP1M is displayed on the channel button assigned to the master fader.
GP1M (Master fader of the VCA group 1)
To remove the channel(s) from the group, touch this button(s) on which the group number is displayed.
In the VCA group, if you touch the channel button assigned to the master fader, the master fader becomes a slave fader of the group, and the group has no master fader. The fader which you touch first after removing the former master fader becomes the new master fader of the group.
3 Chapter Menu
Chapter 3 Menu 53