Note

Do not recall snapshots linked to continuous cues that have duration lower than 5 frames each other. Otherwise, only the snapshot linked with the last cue may be recalled. Automation data for duration of remaining cues may not be recalled and saved.

5STORE button

Touch this button to save a cue. The timecode displayed on the Automation panel is saved with the cue.

6DELETE button

Touch this button to delete the selected cue point from the CUE list 0.

If the event is linked with the cue point, the event is not deleted.

7RECALL button

Touch this button to recall the cue point data selected on the CUE list 0.

When the event is linked with the cue point, this event is executed.

8UNDO button

Touch this button to cancel the previous snapshot function performed using the SNAPSHOT buttons on the Automation panel on the unit.

9KEYBOARD button

Touch this button to open the KEYBOARD window. This KEYBOARD window allows you to enter or change the name of the cue point.

0CUE list

Displays the number, address (timecode) and name of cue points stored.

NUMBER row: Displays the cue number.

TIMECODE row: Displays the time (timecode) of the cues.

By touching the timecode box, you can change the timecode using the ten key pad.

CUE NAME row: By touching a cue name box, you can enter or change the name of the cue point using the keyboard connected to the unit or on the KEYBOARD window.

When you touch the NUMBER button on the top of the NUMBER row or the TIME CODE button on the TIMECODE row, the cue list is sorted in the order of the cue numbers or the timecode.

When the cue list is sorted in the order of the timecode, the current cue is lit green if any cue point is not selected.

qa TC LINK buttons

Touch the button to link a SNAPSHOT RECALL to the specified cue.

qs EVENT buttons

Touch the desired button to open the menu list of the events that can be TC linked.

SNAPSHOT button: Links a snapshot.

NA (NoACTION) button: Nothing is executed.

qd NUMBER buttons

Touch the desired button to open the event name list and select the desired event to be executed.

qf EFFECTIVE CHANNEL buttons Specify the channels which the event affects.

When the ALL button is displayed: Touch this button to specify all channels.

When the EVENT button qs indicates SNAPSHOT then only the ALL button is automatically switched to ALL.

qg EVENT NAME display

Displays the event name.

Initial cue

•CUE 1 is reserved as an initial cue to indicate the start point of the dynamic automation.

•If automation reference timecode is lower value than the CUE 1 value, dynamic automation doesn’t operate.

•To change the initial cue, perform the same procedure as for changing other cue points. But if you set the timecode after the timecode of the initial cue, dynamic automation data between the former timecode and the newly set timecode will be lost. Similarly, you can change the snapshot linked with the initial cue. But if you change it, a problem may occur between the snapshot data and the automation data.

For detailed information on cue, see “Cue Operation Procedure” on page 96.

3 Chapter Menu

Chapter 3 Menu 67