Locations and Functions of Parts and Controls

A button: Recalls automation data stored in the A buffer.

B button: Recalls automation data stored in the B buffer.

By using the A and B buttons, you can copy stored data between the A/B buffers as explained below.

To copy the data stored in the A buffer to the B buffer

 

 

1 Press and hold the A button for more than 2

Chapter

seconds, then press the B button.

 

 

2

The confirmation dialog box appears.

 

Locations

Data in the A buffer is copied into the B buffer.

 

 

2 Select [YES] on the dialog box.

and

 

Functions

To copy the data stored in the B buffer to the A buffer,

 

 

 

 

press and hold the B button for more than 2 seconds,

of

then press the A button. Select [YES] on the dialog

box.

Partsand

3 Timecode display window

Controls

When the LTC button is lit on the timecode input

 

 

 

 

section 4, the timecode is displayed in the window.

 

 

When the BARS button is lit, the timecode is

 

 

converted to bars, beats and the MIDI clock and

 

 

displayed.

Hours

Minutes

Seconds Frames

HOURS MINUTES SECONDS FRAMES

Bars

Beats

MIDI clock

4Timecode input section

Selects the contents to be displayed in the timecode display window 3.

LTC button: When this button is lit, the timecode read by the built-in timecode reader is displayed in the window.

BARS button: When this button is lit, the timecode is converted to the bars, beats and the MIDI clock and displayed.

When both the BARS button and SET button are lit, you can enter the desired value using the ten key pad. The entered value is converted to the timecode and used.

SET button: When this button is lit, you can input the desired timecode using the ten key pad. Also, you can increase or decrease the timecode using the +/- buttons and the jog dial.

When a device is selected on the SELECT MACHINE button 1, you can input the locate time.

When this button is not lit, the timecode display window shows the values read by the built-in timecode reader or the tape time of the device selected by the SELECT MACHINE button 1.

5SNAPSHOT buttons

TC LINK button: When this button is lit, the mixer will automatically link snapshots and mixer cues. In this case, the value displayed on the SNAPSHOT window is treated as the cue number.

Also, when this button is lit, you can manually recall a snapshot which has been linked with a cue.

When the button is lit, the STORE button allows a new cue point and snapshot to be saved and linked. When this button is not lit, you can recall snapshot data manually. The snapshot data is stored without the timecode.

DELETE button: By pressing this button, the snapshot data or the cue currently displayed on the SNAPSHOT display window is deleted depending on the set condition of the TC LINK button.

SETUP button: Press this button so that it lights, to display the SNAPSHOT window or CUE window. (When the TC LINK button is not lit, the SNAPSHOT window opens. When the TC LINK button is lit, the CUE window opens.)

For detailed information on the SNAPSHOT window, see page 64, and for the CUE window, see page 66.

STORE button: Press this button so that it lights, to store the current settings on the SNAPSHOT window as the snapshot data. If the TC LINK button is lit, the snapshot data is stored with the cue.

26 Chapter 2 Locations and Functions of Parts and Controls