RECALL button: Press this button so that it lights, to recall the snapshot data or the cue currently displayed on the SNAPSHOT display window depending on the set condition of the TC LINK button.
UNDO button: Press this button so that it lights, to clear the last snapshot operation.
6SNAPSHOT display window 7 SNAPSHOT SET button
Press the SNAPSHOT SET button 7 so that it lights, to enter the snapshot number in the SNAPSHOT display window 6 using the ten key pad.
Also, you can increase or decrease the timecode using the +/- buttons and the jog dial.
To execute the snapshot number, press the ENTER key.
The number displayed on the window is treated as a cue number when the TC LINK button is lit.
If you press the STORE button when any number is not set on the display window, the lowest unused number is used for the new snapshot (or cue) number.
8Transport control keys
Controls the tape movement of the recorder selected by the SELECT MACHINE buttons 1.
m(Rewind)/M (Fast forward)/B (Play)/x (Stop)/ z (Record)
LOCATE button: Cues up the tape of the recorder selected by the machine controller to the locate time previously set.
9Jog dial section
The jog dial can be used for both machine control and data entry.
Press the SHUTTLE +/- button so that it lights, to control the device selected by the SELECT MACHINE buttons 1 in shuttle mode.
There may be devices that can not be controlled in shuttle mode.
The jog dial can also be used to change data values, for example, by pressing the SET button under the SNAPSHOT display window, the dial adjust the SNAPSHOT number.
0Ten key pad
When the SET button is lit in the Timecode input section 4, you can enter a value in the timecode display window, using the ten key pad.
When the SNAPSHOT SET button 7 is lit, you can enter a snapshot number in the SNAPSHOT display window, using ten key pad.
Pressing the ENTER key accepts the entered value that is displayed on the window.
2 Chapter
and Locations
of Functions
and Parts
Controls
Chapter 2 Locations and Functions of Parts and Controls | 27 |