Menu Windows
AUDIO OVERVIEW Window
To open this window, touch the AUDIO button on the bottom menu bar, then select “OVERVIEW”.
This window allows you to see the settings performed on the unit at glance.
To change channels from the page for CH 1 to CH 24 to the page for CH 25 to CH 48, touch the PAGE button on the window.
This window shows the active/inactive status of the equalizer, dynamics, MTR routing and AUX SEND routing.
When you touch the display, the window of the corresponding channel (where detailed settings of the touched item is displayed) appears.
3 Chapter Menu
7 PAGE button
Channel number
1Input/Assignment display
2EQ display
3DYN display
4AUX display
5PAN display
6Fader display
1Input/Assignment display Displays the following items:
•TRIM: Trim ON/OFF
•DELAY: Delay ON/OFF
•PGM: Status of assignment to the program buses L and R
•MTR: Status of assignment to the MTR bus
2EQ display
Displays whether the equalizer/filter circuit is in or out.
3DYN display
Displays whether the dynamics circuit is in or out.
4AUX display
Displays the AUX send level.
5PAN display
Displays the pan position. When PAN is off, this is displayed in gray.
6Fader display Displays the fader level.
7PAGE button
Changes the channel page to be displayed on the AUDIO OVERVIEW window.
50 Chapter 3 Menu