Menu Windows
3 Chapter Menu
BPRESET button
Touch this button to set ON. You can enter and display the preset time on the PRESET/GENERATE TIME display window.
When the LOCAL mode is selected, touching START will generate timecode from the preset time.
Enter the timecode using the keyboard connected to the unit or on the KEYBOARD window after touching the PRESET/GENERATE TIME display window.
CSTART button
When the generator is in LOCAL mode, touching the START button will make the timecode start running from the preset value.
DSAME AS TIME button
Touch this button to set the user bits to the same value as the current timecode.
ESTOP button
Touch this button to stop the generator, when in LOCAL mode or SLAVE LOCK (AUTO RUN) mode.
FPRESET/GENERATE TIME display window Displays the preset time or the generated timecode according to the PRESET button status.
GUSER’S BIT display window
Displays and enters the timecode user bit data. Enter the user bit using the ten key pad after touching this display window. The values that can be entered are 0 to 9. A, B, C, D, E and F can not be entered.
80 Chapter 3 Menu