About Titles
In operating the unit, data such as snapshots, dynamic automation data, sampling frequencies and timecode required for the mixing operation are stored in ‘Titles’.
There are two types of titles: One is the “current title” automatically created in the flash memory, the other is the title stored as a file.
For detailed information on how to create a title, see “TITLE MANAGER
Window” on page 72.
Initializing a title (CURRENT TITLE CLEAR)
A new current title which has no data is created based on the current sampling frequency and timecode mode setting. At this time, all data other than the sampling frequency and timecode are cleared.
The current title is the work title created in the memory or flash memory.
Saving a title
The current title is saved into the specified TITLE number.
Loading a title
The specified title is loaded in the current title.
If the setting for Fs (sampling frequency) and/or SYNC SOURCE is different between the loaded title and current title, the unit restarts after giving a confirmation message.
Changing the sampling frequency
When you change the sampling frequency, the contents of the current title is cleared.
Titles when turning on the power of the unit
When there are created titles
•The sampling frequency, sync source and timecode mode are set on the unit according to the content of the existing title.
•The current title worked on just before turning off the unit is automatically loaded. The initial cue is automatically recalled and the dynamic automation data is automatically loaded into the effective buffers.
4 Chaper Tips Operation
Chapter 4 Operation Tips | 89 |