7 High-cut filter section

Note

 

FREQ control: Sets the cut-off frequency of the high-

The high-cut filter and low-cut filter operate regardless

cut filter.

of the setting of the IN button.

IN button: Press this button to activate the high-cut

 

 

filter.

 

 

AUX SEND section and CHANNEL button

 

 

 

 

 

AUX SEND

 

 

 

 

1

2

3

4

5

6

7

8

1 AUX SEND control

ON PRE

ON PRE

ON PRE

ON

PRE ON PRE

ON PRE

ON PRE

ON PRE

2ON button

CHANNEL

3PRE button

4CHANNEL buttons

1AUX SEND control 2 ON button 3 PRE button

Press the ON button so that it lights. The channel signal is sent to the corresponding AUX bus. AUX SEND controls 1 to 8 allow you to adjust the level of the corresponding AUX send bus.

If the AUX SEND bus is set to stereo, the even number controls function as the pan control.

When the PRE button is lit, the pre-fader signal is sent to the corresponding AUX bus. When the PRE button is not lit, the post-fader signal is sent.

The AUX SEND control, ON and PRE buttons are available for both snapshot and dynamic automation.

4CHANNEL buttons

Allow the access channel number to be incremented or decremented - allowing fast use of the Assignment panel.

2 Chapter

and Locations

of Functions

and Parts

Controls

Chapter 2 Locations and Functions of Parts and Controls

21