MONITOR Window
To open this window, perform one of the following: | This window allows you to control and check the |
• Touch the AUDIO button on the bottom menu bar, | settings for monitoring. |
then select “MONITOR.” |
|
•Press the SETUP button on the STUDIO LS section or the CR MONITOR section of the front panel.
6 MINI MONITOR button
7 PFL buttons
8 AFL buttons
9 SOLO buttons
1STUDIO LS tab
2 CR MONITOR tab
3 MONITOR MODE buttons
4CUT ENABLE buttons 
5 SOURCE buttons
3 Chapter Menu
1STUDIO LS (studio monitor) tab
Touch this tab to switch the display to the studio monitor section.
2CR MONITOR (control monitor) tab Touch this tab to switch the display to the control room monitor section.
3MONITOR MODE buttons
Select the mode for the audio monitoring. STEREO button: Touch this button to select the stereo mode.
The L signal (or the odd channel) is outputted directly to the L channel of the monitor and the R signal (or the even channel) is outputted directly to the R channel of the monitor.
MONO button: Touch this button to select the monaural mode.
The L + R signal is outputted to both the L and the R channels of the monitor.
SURR (surround) button: Touch this button to select the surround mode. The signal of MTR 1 to 6 or EXT 1 to 6 is sent to CR MONI 1 to 6 as the surround signal. This button is active only for CR MONITOR and you can turn it on and off regardless of the settings of the STEREO and MONO buttons.
Chapter 3 Menu 59