2 Chapter

and Locations

of Functions

and Parts

Controls

1OVER (analog head amplifier peak) indicators Lights when the input level reaches the level where the analog head amplifier starts to clip. The clip level is about -6 dBFS.

2SIGNAL (analog head amplifier signal) indicators

Lights when the signal is input to the analog head amplifier. The level at which the SIGNAL indicator lights is about -40 dBFS.

Note

The OVER indicator and SIGNAL indicator are active only when the input signal is routed to any channel using the input router.

3+48V button

Press this button to send + 48 V power to the microphone connected to the IN A connector (XLR connector) on the rear panel.

Chapter 2 Locations and Functions of Parts and Controls

11