3 Chapter Menu

Menu Windows

4Function selectors

Switch the function to be displayed on the Parameter display section 3 between Expander/Gate and Compressor/Duck.

EXPANDER/GATE tab: Touch this tab to select the Expander/Gate function.

COMPRESSOR/DUCK tab: Touch this tab to select the Compressor/Duck function.

5DYNAMICS IN button

This puts the dynamics in the signal path.

Note

Even if the individual IN buttons of the EXT/GATE or the COMP/DUCK are selected, the dynamics are not in the circuit if the DYNAMICS IN button is out.

6INSERTION POINT section

Switches the insertion point of the dynamics between

PRE/POST EQ.

PRE EQ button: Touch this button to insert the dynamics processing before the equalizer.

POST EQ button: Touch this button to insert the dynamics processing after the equalizer.

7KEY button

Touch this button to open the sub menu that allows you to select the key signal for the dynamics processing.

LOCAL: Uses its own channel signal as the key signal.

1 to 24 (or 25 to 48): Uses the signal of the selected channel as the key signal. The audio channel is selected using two-level channel lists.

AUX: Uses the AUX SEND signal as the key signal. The setting of this button is common to EXPAND/ GATE and COMPRESSOR/DUCK.

8EXP (expander)/COMPRESSOR button/9 GATE/DUCK button (when the EXPANDER/ GATE tab 4 is selected)

Selects the parameters to be displayed on the Parameter display section 3 between the expander (when the EXP button is selected) and gate (when the GATE button is selected).

When the COMPRESSOR/DUCK tab 4 is selected,

8becomes the COMPRESSOR button and 9 becomes the DUCK button.

0LINK button

Touch this button to link the dynamics settings of this channel to the adjacent channel to the right.

The setting of this button is common to EXPAND/ GATE and COMPRESSOR/DUCK.

Note

Adjacent channels are placed in different pages, such that CH 24 and CH 25, CH 48 and CH1, cannot be linked. Also, AUX SEND 1 to 4 and AUX SEND 5 to 8 can be linked. However, AUX SEND 4 and AUX SEND 5 cannot be linked.

qa KNEE button

This button is effective only when the compressor mode is selected.

Touch this button to open the sub menu. Then select the knee amount. If SOFT is selected, the dynamics transfer function has a smooth curve at the threshold point.

qs Function access buttons

These buttons have the same function as the ACCESS button and IN button on the DYNAMICS section on the Parameter Setting panel.

ACCESS button of EXP/GATE (or COMP/ DUCK): Touch these buttons to switch the display between controlling the EXP/GATE and COMP/ DUCK.

IN button of EXP/GATE (or COMP/DUCK): Touch these buttons to activate the parameters of the expander/gate (or compressor/ducking) displayed on the Parameter display section 3.

48 Chapter 3 Menu