Star Micronics 4111 manual Reset the printer Esc Y Enable display function

Command			Function	Page
<ESC> *b n Y			Advanced vertical raster position	87
<ESC> *C n A			Define horizontal rectangle size in dots	88
<ESC> *C n B			Define vertical rectangle size in dots	88
<ESC> *C n D			Specify font ID	62
<ESC> *C n E			Specify character code	82
<ESC> *C n F			Font control	76
<ESC> *C n G			Specify pattern ID	89
<ESC> *C n H			Define horizontal rectangle size in decipoints	88
<ESC> *C n P			Fill with specified pattern	91
<ESC> *C n V			Define vertical rectangle size in decipoints	89
<ESC> *p n X			Position horizontal cursor in dots	54
<ESC> *p n Y			Position vertical cursor in dots	56
<ESC> *r B			End raster graphics	86
<ESC> *r n A			Start raster graphics	85
<ESC> *r n F			Set graphic image orientation	84
<ESC> *r n S			Specifies pixel width of raster graphics	87
<ESC> *r n T			Specifies pixel height of raster graphics	86
<ESC> *t n R			Select raster graphics resolution	84
<ESC> *V	H	N	Select transparent/opaque mode for source
			images	92
<ESC> *V	n	O	Select transparent/opaque mode for patterns	92
<ESC> *V	n	T	Select fill pattern	91
<ESC> 9			Clear left and right margins	48
<ESC> =			Half line feed	58
<ESC> E			Reset the printer	45
<Esc> Y			Enable display function	75
<ESC> Z			Disable display function	75
<ESC> Z			Self test	43

131