Within a label, each character begins to the right of the previous character. This is a horizontal text path (unless altered by DI or DR).
Within a label. each character begins below the previous character. This is a vertical text path (unless altered by DI or DR).
Within a label, each character begins to the left of the previous character. This is a horizontal text path (unless altered by DI or DR).
Within a label, each character begins above the previous character. This is a vertical text path (unless altered by DI or DR).
The /iHeparameter specifies the location of each character with respect to the preceding character, relative to the labeling direction defined by DI or DR commands. The line is O,the normal line feed function with respect to text path direction is selected. The line is 1, the reverse line feed function with respect to text path direction is selected.
Extra space command
ES }t’idth[, height ;]
This command allows the character and line spacing to be changed. The values are added to or subtracted from the font parameters. This remains in effect until the next ES command or the printer is reset.
Select primary font command
FI,j{~n~id [:]
This command allows the selection and use as the standard or primary font any font to which an ID has been assigned. For outline fonts, the SD command must also be used to specify the point size.
This command executes an SB command to insure compatibility of the font selected with the font types allowed.
Select secondaryfont command
FNjimt id [;]
This command does for the secondary font what FI does for the primary font.
122
