5.8ESCAPE SEQUENCES IN GIJ2 MODE
When the following commands are given, they have the same results, whether the printer is in the standard mode or the GL/2 mode.
<ESC> E
●the initialization IN command is executed.
. the picture frame is set to its default size.
●the frame anchor is set to its default position,
. the plot size is set to its default size.
. the page orientation is reset.
A reset command from the control panel will have the same effect,
<ESC> &/n O
. the orientation of the picture frame is changed.
. the picture frame is set to its default size.
. the frame anchor is set to its default position.
●the plot size is set to its default size.
cESC> &a n P
●The printing direction command does not effect the orientation or position of the GL/2 picture frame.
<ESC> &/n P
●the picture frame is set to its default size.
. the frame anchor is set to its default position.
. the plot size is set to its default size.,
. P 1 and P2 are set to their default positions.
. the cursor is set to P 1.
●the soft clip window is set to its default size.
●the polygon buffer is cleared.
126
