Symbols are taken from the currently selected character set and are sized, slanted and rotated in the same way as characters.
S c
SP pe}lnumber [;]
This command selects the printer’s logical pen for subsequent plotting. This command must be set in order to output.
Pen Ois white; it is used when no drawing is required or to draw white lines on a black fill, with transparency off.
Pen 1 is black; values greater than I are treated as 1.
S v c
SV hpe [, optl [, opt2]]
This command selects the type ofscreenin.g(area fill) to be applied to vectors (lines. hatching patterns (fill types 3 and 4), arcs, circles, and edges of polygons, rectangles, and wedges). This command does not affect solid fill types, labels, stroked characters, or edges of characters.
There are three types of screen fill: shaded fill,
The meanings of and relation between parameters are as given in the following table:
Type | Meaning | opt 1 | opt2 |
o | no screening | ignored | ignored |
I | shaded | shading percentage, | ignored |
|
| between O(white) and |
|
~ |
| 100 (black) |
|
user defined raster | index; the pen for the | O:black pen, | |
| (see RF) | black pixels is selected | 1; current pen |
|
| as follows |
|
21 | predefine | fill type | ignored |
. Without parameters, this command turns off screening.
If oprl and/or opt2 is missing, the previous and appropriate default values are used.
117
