CfmcCF,fillmode [, edgept’t?:]
Thiscommand specifies the way scalable fonts are filled and edged; bitmap
andStick fontscannotbe edgedandcan befilled onlywithraster fill,shading,
orcross-hatch patterns. Scalable charactersmaybe filled with any of the fill
patterns specified by the FTcommand (shading, hatching, cross-hatching,
and user-defined raster fill patterns).
The ,fill mocle parameter specifies how the printer will render filled
characters to the following parameter values.
o
1
2
3
Specifiessolid fill usingthecurrent pen and edging with thespecified pen
(orcurrent pen if the edge pen parameter is not specified).
Specifies edging with the specified pen (or current pen if the edge pen
parameter is not specified). Characters are filled only if they cannot be
edged(bitmap or stick characters). using the edge pen.
Specifies filled characters using the current fill type (refer to the FT
command).The currently selected pen is used. Characters are not edged.
If the edgepen parameter is specified. it is ignored.
Specifies filled characters using the current fill type (refer to the FT
command).The currently selected pen is used.Characters are edged with
the specified pen (or current pen ifthe edge pen parameter is not speci-
fied).
Forcharacters that are to be edged, the edge penparameter indicates thepen
thatwill be used to edge the character. If this parameter is O. thecharacters
are notedging. If this is 1, black edging isselected.
CpcCP spaces, lines [:]
Thiscommand moves thecurrent pointhorizontallyby thevalue of“spaces”
and vertically by the value of “lines”.Horizontal movement is to the right
when “spaces” is positive and to the left when it is negative. Vertical
movement isdown when “lines”is positive and up when it is negative.
ACP command with no parameters is the same as <CR>, <LF> within a
label.
120