Tally Genicom 8026DN manual Blotted printing

3-8

TallyGenicom Intelliprint 8026DN Color Laser Printer User Guide

Print Quality Problems

Description	Cause	Action
Partial blanks,	The paper is damp.	Replace the paper.
creased paper or		Refer to
blotted printing
		• “Paper Handling” on page 2-6
	The paper is outside the	Replace the paper with a
	recommended specification range.	recommend size and type.
		Refer to
		• “Paper Handling” on page 2-6
	The transfer roll cartridge or fuser	Reinstall the transfer roll cartridge
	unit is not installed correctly.	and/or fuser unit.
		Refer to
		• “Transfer Roll Cartridge” on page
		5-13
		• “Fuser Unit” on page 5-16
	Condensation inside the printer	Turn the printer on and leave it one
	causes partial blanks or creased	hour at least to get rid of the
	paper.	condensation. If the problems still
		occur, contact your dealer or a
		Customer Service Center for
		assistance.

Vertical blanks	The drum cartridge is not installed	Reinstall the drum cartridge.
	correctly.	Refer to
		• “Drum Cartridge” on page 5-9
	The drum cartridge, transfer roll	Check the condition of the drum
	cartridge, or fuser unit is old or	cartridge, transfer roll cartridge and
	damaged.	fuser unit, and replace as
		necessary.
		Refer to
		• “Drum Cartridge” on page 5-9
		• “Transfer Roll Cartridge” on page
		5-13
		• “Fuser Unit” on page 5-16
	The development unit is damaged.	Contact your dealer or a Customer
		Service Center for assistance.

Jun 06