Tally Genicom 8026DN manual For Machine Operation

TallyGenicom Intelliprint 8026DN Color Laser Printer User Guide

Safety Notes

9

For Machine Operation

WARNING

Do not place any liquid container such as a vase or coffee cup on the machine. Split water can cause fire or electric shock.

Do not place any metal parts such as staples or clips on the machine. If metal and flammable parts get into the machine, they can short-circuit internal components, and cause fire or electric shock.

If debris (metal or liquid) gets into the machine, switch off and unplug the machine. Contact our Customer Support Center. Operating a debris-contaminated machine can cause fire or electric shock.

Never open or remove machine covers that are secured with screws unless specifically instructed in this manual. A high voltage component can cause electric shock.

Do not try to alter the machine configuration, or modify any parts. An unauthorized modification can cause smoke or fire.

This equipment is certified as a Class 1 laser product under IEC60825-1 (Class 1). This means that the machine does not emit hazardous laser radiation. Since radiation emitted inside the machine is completely confined within the protective housings and external covers, the laser beam cannot escape from the machine during any phase of user operation. Do not perform any operation apart from the instructions given in the manual. There may be a danger of laser beam leakage.

CAUTION

Do not place a magnet near the safety switch of the machine. A magnet can activate the machine accidentally, resulting in injuries.

Never touch a labeled area found on or near the heat roller. You can get burnt. If a sheet of paper is wrapped around the heat roller, do not try to remove it by yourself to avoid injuries or burns. Switch off the machine immediately, and contact our Customer Support Center or your dealers.

Do not place any heavy object on the machine. An off-balance machine can fall over or the heavy object can fall, causing injuries.

Do not use a highly flammable spray or solvent near the machine. It can cause fire.

Jun 06