Tally Genicom 8026DN manual Dhcp

7-26

TallyGenicom Intelliprint 8026DN Color Laser Printer User Guide

Interface Menu

SUBMENUS	DEFAULT	AVAILABLE	PROCEDURE FOR CHANGING SETTING
	SETTING	SETTINGS
NETWORK 1 SETUP	Interpreter:	Interpreter:	1. Press NEXT or PREVIOUS to move
This submenu allows	Auto Switch	Auto Switch	among the submenus.
you to set up the		PCL	2. Press SELECT to choose a submenu.
Network interface.		PostScript 3	3. Press NEXT or PREVIOUS to scroll
	Format:	Format:	through the settings.
			4. Press SELECT to save this setting.
	Raw	Raw
		Normal
		Binary
	Network Address:	Network Address:
	IP Address:	IP Address:
	(user-specified)	(user-specified)
	Subnet Mask:	Subnet Mask:
	(user-specified)	(user-specified)
	Default Router:	Default Router:
	(user-specified)	(user-specified)
	LPD Banner:	LPD Banner:
	Off	On, Off
	DHCP:	DHCP:
	On	Off, On
	Delay Out Close:	Delay Out Close:
	Off	Off, On
	mDNS:	mDNS:
	On	On, Off
	Local Link:	Local Link:
	0.0.0.0
	Mulit-Session:	Mulit-Session:
	On	On, Off
	AppleTalk:	AppleTalk:
	On	On, OFF
	Binary PS:	Binary PS:
	Off	Off, On
	Connection Speed:	Connection Speed:
	Auto Sense	Auto Sense
		10 Mbit Full
		10 Mbit Half
		100 Mbit Full
		100 Mbit Half

Jun 06