Tektronix AWG610 Edit a Waveform

Tutorials
AWG610 Arbitrary Waveform Generator User Manual 2-63
You can only edit the waveform within the area between the two vertical cursors.
You can move the active cursor (currently-selected vertical cursor) horizontally
by turning the general purpose knob or by entering a numeric position with the
front-panel keypad.
Select between the active cursors by pushing the TOGGLE front-panel button
(located near the general purpose knob). The active cursor is represented by a
solid vertical line, and the inactive cursor by a vertical dashed line.
The current cursor positions are displayed in the L and R fields in the upper part
of the editor. By default, the left cursor is positioned in the left-most position of
the editor screen. The right cursor is positioned in the right-most position of the
editor screen.
Figure 2-40: Waveformin the waveform editor
Do the following steps to specify the edit region (area between the cursors) using
the cursors:
1. Confirm that the left cursor is active by checking the following:
The L field is highlighted.
The left cursor is a solid line.
The right cursor is a dashed line.
If the left cursor is not active, push the TOGGLE button on the front panel.
Edit a Waveform