Tektronix AWG610 Edit the Equation, Save the Edited Equation

Tutorials
AWG610 Arbitrary Waveform Generator User Manual 2-67
3. Push the Drive bottom button.
4. Push the Floppy side button to select the floppy disk drive.
The file list for the floppy disk appears.
5. Select the file log_swp.equ from the file list using the general purpose knob.
6. Push the EDIT bottom button.
7. Push the EDIT side button.
The equation editor displays the log_swp.equ file.
Do the following steps to replace the sin() equation keyword with the tri()
keyword:
1. Use the b button to move the cursor downward and position it at the line
where the sine function is written.
2. Use the ' button to move the cursor position to just after the word sin.
3. Push the button three times in the keypad to delete the word sin.
4. Push the Math Functions bottom button to display the math functions
pop-up menu.
5. Select tri from the pop-up menu using the general purpose knob.
6. Push the OK side button. Confirm that the word tri is inserted at the cursor
position.
At compile time you cannot specify a storage drive. The instrument uses the
drive specified when you loaded or saved the equation file. To compile the edited
equation file to a hard disk file, you must first save the edited equation to the
hard disk.
Do the following steps to save the edited equation to a hard disk file:
1. Push the File bottom button.
2. Push the Save As... side button.
The Storage Select dialog box is displayed on the screen.
3. Select Main from the dialog box using the general purpose knob.
4. Push the OK side button.
The Input File Name dialog box appears.
Edit the Equation
Save the Edited Equation