The Setup Menu Screen
AWG610 Arbitrary Waveform Generator User Manual 3-43
During waveform output, you can make changes to an output parameter using
the shortcut controls: VERTICAL LEVEL/SCALE, VERTICAL OFFSET, and
HORIZONTAL SAMPLE RATE/SCALE.
Changes you make with the editor during waveform output are shown immedi-
ately. Refer to Edit... on page 3–32.
A file that has been loaded and that is being output will be reloaded when one of
the following conditions is met:
The waveform or pattern file is modified with the editor. (Auto or Manual
mode in the Settings bottom menu).
The file is changed with Copy or Rename by operating the front-panel, GPIB
or Ethernet control.
Changes are made to a sequence file.
A file is received from GPIB or Ethernet and changes are made to the file.
Auto-reload occurs when changes are made to a file. The file length may change
due to Cut or Paste or because it is subjected to Copy as a thoroughly different
file. If so, auto-reload will fail and the output file will be named NULL.
Waveform and pattern files contain the clock attribute values appended. If you
specify a waveform or pattern file as the output file, the clock value will be
loaded from the file and set.
If you specify a sequence file for the output file, the clock specified in the first
file in the sequence list sets the instrument clock rate.
If you load the file as the output file when the following two conditions are met,
the waveform in the edit buffer will be loaded:
You have performed a edit session before loading the output file (while the
output file name is NULL).
You have made changes to the waveform data and/or clock attributes
(regardless of whether the file has already been saved).
Regarding the clock attributes, the values specified in the edit will be loaded.
If the output with the editor is in the Auto mode, reload takes place each time
changes are made to the edit buffer. The clock attributes are not updated at this
time.
When the file is first loaded , the clock attributes are set. Clock changes made
with the menu take higher priority over those that are made with the editor by
means of the auto-update of the output.
Automatic Reloading ofOutput FilesWaveform Files andSample Clock Rates