Tektronix AWG610 Making Directory, Selecting Files Copying Files, Renaming Files

File Management
AWG610 Arbitrary Waveform Generator User Manual 3-215
3. Push the Directory bottom button.
Push the Up Level side button to move a directory up by one level.
To move a directory down by one level, select the directory from the file
listing on the screen, and then push the Down Level side button.
Repeat step 3 until you reach the destination directory.
Do the following steps to create a new directory:
1. Push the EDIT button.
2. Select a drive and/or directory.
3. Push Directory (bottom)Make Directory (side).
The Input Filename dialog box appears.
4. Use the Input Filename dialog box to specify the new directory name and/or
destination.
Do the following steps to select a file:
1. Push the EDIT button.
2. Select a file from the file listing on the screen using the y or b buttons or
the general purpose knob.
Do the following steps to copy or paste a file:
1. Select a file.
2. Push the Copy side button. The Input Filename dialog box appears.
3. Use the Input Filename dialog box to specify the duplication’s file name and
destination. The copied file destination must be on the current drive but can
be a different directory.
Do the following steps to rename a file:
1. Select a file or directory to rename.
2. Push the Rename side button.
The Input Filename dialog box appears.
3. Use the Input Filename dialog box to specify the new file name and the
destination.
Making Directory
Selecting Files
Copying Files
Renaming Files